How to build a Floating Platform
A floating habitat by Mike Strickland has been in use for almost a decade. As shown below, the float is supported by six 55-gallon drums. The drums are held in place with a "band" of 2x10's....
|
| |
How to build a Four Season Room
Forty years ago, when Ronold or too warm for comfort. Ron decided to convert his porch into a four-season room - preserving both the cross ventilation and the great views, while making it more practical for year round use....
|
| |
How to build a Gambrel Roof Braced Rafters
This leaflet gives a listing of 15 designs for gambrel roof braced rafters which can be easily assembled on the farm or in a prefabricating plant. The gambrel roof form has retained its popularity with farmers and builders for several good reasons...
|
| |
How to build a Gambrel Roof Building - Barn
This plan is for a two-storey gambrel roof barn 7.3, 9.1, or 11.6 m (24, 30 or 38 ft) in width. It can be built any length in multiples of 2.4 m (8 ft), up to a maximum length determined on the plans, taking into consideration the width and wind velocity. A loft area provides overhead storage for ha...
|
| |
How to build a Guest House Building
1 bedroom guest house, 18ft x 25ft with 8ft open porch, gabel roof, insulated, raised wood floor...
|
| |
How to build a Home Sports Center
Are you a sports fan that hates to miss a single second of team action? If so, then Weekend Remodelinghost Fuad Reveiz has the project for you! Here, Reveiz will demonstration the creation of a Home Sports Center. This one features a plasma screen and two monitors -- all on one wall and all controll...
|
| |
|
How to build a Igloo Building Tool
I thought this was a neat idea. But the catch is, the store bought igloo kit costs over $200 Canadian so I made a jig that does the very same thing....
|
| |
How to build a Insulated Pump House Building
This plan details a small wood frame building with a hinged roof for housing pumps, pressure tanks and motors....
|
| |
How to build a Kitty Condo Project
Lathe-Induced Design Extravagance. Text and photos by Tom Hintz - This is a project gone wild due to a lathe in the shop. What happens when you try to build what could have been a simple kitty condo in a shop with a new lathe? 18 columns, a total of 158 beads and 19 balls, among other spindle fancin...
|
| |
How to build a Layout Tool
A lay-out tool helps when marking many screw holes all inset the same distance. It can be used to mark four different-size inserts...
|
| |
How to build a Masonry Walls and Foundation
This free housing construction plans and projects information is courtesy of the North Dakota State Univ. web site. Follow the instructions on that page to quickly find the plan number. This plan number is 7031....
|
| |
How to build a Pieced Together Partition
Using a drill and driver bit, remove the hinges from both sets of bifold doors. Separate the doors and set aside as pairs....
|
| |
|
< Previous
1
2
3
4
5
6
Next >
|
