How to build a Knee-brace Systems for Windbracing Farm Buildings
A knee-brace system is a structural component that transfers wind pressures exerted on the sidewalls and roof of a farm building to its foundation. This, of course, induces shear and bending in the stud or pole. Knee braces are an effective windbracing system for either pole or stud-framed farm buil...
|
| |
How to build a Lamb - With Feeder Creep
The creep consists of two 2.4 m (8 ft) sections hinged together so that a pen is formed when the sections are attached to two adjacent partitions in the sheep barn. Truck hooks and fasteners hold the creep panels in place. The panels are constructed of 19 mm (1 in.) boards and are easy to lift and s...
|
| |
How to build a Lamb Feed - 40 x 70 ft Barn
Truss Rafter, Pole Frame, Conv Fdng, Scrp under SF. Plan #MW 72505...
|
| |
How to build a Lamb Feeding - 12 x 16 Portable Building - Shed
Shed had feeder, wire mesh fencing, metal roof and expanded metal floor...
|
| |
How to build a Lathe Pole - and Shave Horse Design
I have been using these designs for about 3 years regularly at shows so they have stood the test of time as portable units, easily fitting into a car or small trailer along with tools, stock and wood. The Lathe and shave horse can be assembled in less.....
|
| |
How to build a Lathe Pole - End Vise
Making Handles and Chair Rung Tenons. Text by John Alexander and photos by Peter Follansbee.Viires, Woodworking in Estonia, illustrates a simple pole lathe erected on the end vise of a cabinetmaker...
|
| |
|
How to build a Lathe Pole (Bodgers Muddle)
For many of us, the use of a pole is impractical in the modern postage stamp gardens and mini garages beloved of today...
|
| |
How to build a Linda Tray Bird Feeder
A vertically mounted feeder tray that would work well for birds or squirrels....
|
| |
How to build a Loading Sheep - for Double Decker Truck Working Chute
This leaflet describes a variable height stationary loading chute for loading sheep onto two levels of a double decker truck. The ramp of the loading chute can be winched up or down from a minimum loading height of 750 mm for a half ton truck to a maximum of 2400 mm for the second deck of a large tr...
|
| |
How to build a Loading System for Large Trucks
This is a plan for a corral system to facilitate efficient and orderly loading of large cattle liners. A handling system for loaing of large trucks will benefit from some special adaptations for sorting as well as loading cattle. Modern cattle liners that typically hold about 50 finished steers, are...
|
| |
How to build a Log Compost Pit
For lawn and garden waste.This list was prepared to assist you in obtaining plans from The University of Tennessee Extension. Although many of the plans are for agricultural structures, a wide variety of building and equipment plans is available. The plans are arranged by subject to help you locate...
|
| |
How to build a Mechanical Feeding Open-end Pole Building - Sheep Barn
This plan gives details for an Eastern Canadian sheep barn for total confinement of 170 ewes and their lambs. The barn is 10.2 x 36 m (34 x 120 ft), and the length can be changed in units of 2.4 m (8 ft) if necessary. A feed manger 870 mm (32 in.) wide at the center of the building span provides fee...
|
| |
|
< Previous
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Next >
|
