How to build a Air Compressor Cart
I use a small portable air compressor in my shop. But despite the name, I find it cumbersome to carry this compressor around where I need it. So instead, I built a small, roll-around cart for the compressor...
|
| |
How to build a Air Hose Caddy
I bought one of those yellow coiled hoses to use with my air compressor. And for the most part it worked great. The lightweight, compact design made it a nice addition to my small shop. But I encountered one minor problem. I didna simple solution....
|
| |
How to build a Air Station Assembly Table
A wide variety of air-tools can be used in the shop to assemble projects ranging from small craft items to cabinets and furniture. In most instances, a sturdy workbench or table is needed as a work surface to assemble projects. The air-station shown provides a sturdy work surface as well as storage...
|
| |
How to build a Blind Depth Gauge for Dust Collection Cyclone Barrels
By Grant in Iowa - Since the bin is under vacuum, the small air leaks around the dowel should be insignificant to system efficiency. You can then mark the dowel like a dipstick:...
|
| |
How to build a Box Fan Filter Dust Control
Like a lot of woodworkers, I made a cheap air cleaner for dust in my shop by attaching a furnace filter to a box fan. I just set the fan on my workbench whenever Im sanding. It works so well that I decided to make a more permanent air cleaner. This woodworking information is courtesy of the Woodwork...
|
| |
How to build a Cyclone Dust Extractor
The dust extractor is a 40 litre Chlorine bucket on top of a 160 litre garbage bin....
|
| |
|
How to build a Drill Press Dust Collector
Wood chips and sawdust don t stay around long when you hook up this clamp-down collector to your shop vacuum or dust-collection system.
...
|
| |
How to build a Dust Collection Cyclone
The purpose of this site is to share what I have learned with other woodworkers about the hazards of wood dust and what I did to help protect myself and my family. This particular page steps you through the process I used to build a blower. A blower is a powerful high-speed device that if you build...
|
| |
How to build a Dust Collection Hood at The Lathe
As an answer to the questions about collecting dust, shavings, and debris at the lathe, I offer the following observations....
|
| |
How to build a Dust Collector Shavings Extractor
A dust collector is essential in a woodturners workshop to keep fine sanding dust under some sort of control. The dust collector can also be used as a vacuum cleaner for removing shavings from the workshop. A simple cloth bag type is quite adequate for sanding but has problems when used as a shop va...
|
| |
How to build a Dust Collector Using a Toro Leaf Blower
Plan to build a dust collector using a toro leaf blower....
|
| |
How to build a Dust Cyclone Project
Growing concerns over health issues plus the constant layer of dust over everything in my shop led me to the project of building a DIY cyclone. This is a detailed account of the construction as well as some info that I think will be useful to those starting from scratch. I hope you find the informat...
|
| |
|
1
2
Next >
|
