How to build a The Prism Build a One Sheet Boat
A boat made of just a single standard sheet of plywood (The "standard" standard, 48" by 96", or 122 cm by 244 cm. There are other standards too...)
If the transoms, sides or any other parts of the hull are made of something else, the boat is not a one sheet boat, but something else.
Chine logs...
|
| |
How to build a Tiny Bear 10ft
PolySail International Boat Designs from the 1940's: Treasures from the Past TINY BEAR: A Jr. Moth Class Sailboat Tiny Bear is a 10' plywood scow designed by J. Julius Fanta that weighs in at only 70 lbs. Primarily intended for youngsters sailing on protected waters, grown-ups can find plenty of exc...
|
| |
How to build a Traditional Indonesian Boat - Madura Jukung (Trimaran)
The canoe on the beach at Slopeng on the north shore of Madura. Slopeng is the name in Bahasa Madura, the local language, but some maps call it Salompeng.
The little hut and rainwater catchment next to the canoe. The canoe doesn't appear to have moved in a year or two.
Details of the canoe's const...
|
| |
How to build a Utility - Buddy Boat
Equipped with a small hp motor, this buddy boat makes an excellent fishing boat....
|
| |
How to build a Utility - Dolly Varden Boat
An open utility outboard for fishing and general use on rivers and lakes....
|
| |
How to build a Utility - Flying Saucer Air Boat Boat
A fast inexpensive airboat that will take you into shallow waters and marshes....
|
| |
|
How to build a Utility - Jon Boat Boat
Historical flat bottomed boat with squared stem and transom....
|
| |
How to build a Utility - Sea Rover Boat
An ocean going outboard that can be built as a sports, utility or cabin model in either a 15 or 17 ft length....
|
| |
How to build a West Greenland Paddle
The Greenland paddle has become increasingly popular among sea kayakers in North America, Europe, and other parts of the world....
|
| |
How to build a Wooden Boat
For several years I have wanted a small sailboat that I could use on the lakes and reservoirs around our area. But I have never found one that I liked until now. The criteria that I set for my search was quite simple, or it seemed. We must be able to transport it on top of our car. It must be capabl...
|
| |
How to build a Wooden Canoe Paddle
This canoe paddle was first carved as a model from a section of a willow branch and then an actual full size paddle was created from a 2....
|
| |
How to build a Wooden Propeller
Laminated plywood propeller, 16"diameter x 24" pitch The following notes describe a method for constructing a propeller of epoxied laminations of marine-grade plywood, suitable for the low power and rpm of human-powered watercraft,
and within the capabilities of one competent in elementary geometry...
|
| |
|
< Previous
1
2
3
4
5
6
7
8
9
10
11
12
Next >
|
