Belt Sander Modifications
The typical Belt Sander like Bench Grinders are nearly always fitted with an inadequate Stop/Rest particularly if used for heavy use in the Vertical Mode and when used for Tool Sharpening....
|
| |
Correct buffing technique makes all the difference in woodworking
Building custom furniture was one of the things I did to pay my way through York University back in the early 1980s, and the challenge of satisfying clients pushed me to learn things I probably wouldn't have discovered otherwise. And finishing is where I made some of my most exciting discoveries bec...
|
| |
How to build a $20 Portable dc Arc Welder
If you can scrounge an old lawn mower, an automobile alternator, and a 12-volt battery, you can . . ....
|
| |
How to build a 1 5 Scale Sherman Tank
I bought a toy King Tiger for my 5-year old son (the only reason we men have kids is so we can play with their toys) and, well, I just got to thinking. Could this thing be scaled up and fitted with R/C controls? How big could it be made? Why not - dare I say it? - big enough for ME TO DRIVE AROUND?...
|
| |
How to build a 16th Century German Wheelbarrow
Although it would be possible to give a set of plans that spelled out in detail all of the measures and sizes needed to build a wheelbarrow, in this case I think, it is more important for the builder to grasp some of the engineering considerations involved in the construction of the wheelbarrow and...
|
| |
How to build a 3d Hanging Baskets
This article includes patterns for two styles of basket trees and three styles of baskets....
|
| |
|
How to build a 4-corner Miter Clamp Jig
This easy-to-build miter clamp and one handscrew are all you need to make perfect frames...
|
| |
How to build a 9 Drawer Tool Box
Nine drawers of storage in this 2-piece toolbox give you a place for everything....
|
| |
How to build a Accesory - for Your Power Miter Saw Box
Build this plywood accessory box to provide extra support when cutting long workpieces on your power miter saw. When laid flat next to the saw, the box matches the height of the miter saw bed exactly. You may want to build two accessory boxes...
|
| |
How to build a Adjustable Miter-Saw Stop
This handy stop grips tightly and is easy to adjust, so you can lock in crosscuts. A spacer the same thickness as the saw...
|
| |
How to build a Adjustable-height Assembly Table
Cutting Diagram only. This project appears in ShopNotes #60. Now sold only in Hardbound Edition - Volume 10 ShopNotes Back Issues 55-60...
|
| |
How to build a Alignment - for Face Gluing Jig
When gluing two or more pieces face to face (like making a set of thick legs for a project), they tend to slip out of alignment as you tighten the clamps. Here is one solution...
|
| |
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
Next >
|
