How to build a Drafting Table With Built in Light
A simple jpg with basic shematic layout. No directions given. Purpose of this plan is to display ability of Macromedia...
|
| |
How to build a Draw Knife from a File
This is a wonderful tool for bow making. It does not give as much leverage as the bent handled draw knife; however, it can be used by pulling or pushing. A very handy advantage....
|
| |
How to build a Drawer-pull Mounting Jig
Mounting drawer pulls has never been easier than with this handy shop helper....
|
| |
How to build a Drill Bit Spacer Jig
Locating a hole or a slot an exact distance away from the edge of a workpiece can be tricky. The problem is measuring between a round drill bit and a flat fence. To avoid this, I use a drill bit as a spacer, see drawing....
|
| |
How to build a Drill Depth Stop
There are sets of depth stops available for standard brad-point drills, but not for the wider size range of twist drills. Here is a solution....
|
| |
How to build a Drill Depth Stop
Manufactured stop collars are great for drilling holes at a consistent depth. But they don...
|
| |
|
How to build a Drill Press Cabinet
Turn wasted space into storage space.In my cramped little shop, every square foot counts. With that in mind I designed this cabinet to fit in the wasted space under the table of my floor-model drill press. Submitted by Jean Bartholome, Dundas, South Dakota....
|
| |
How to build a Drill Press Clamp Jig
Occasionally I need to glue-up two small pieces of wood. But it...
|
| |
How to build a Drill Press Dust Collector
Wood chips and sawdust don t stay around long when you hook up this clamp-down collector to your shop vacuum or dust-collection system.
...
|
| |
How to build a Drill Press I-beam
Drilling holes in small pieces can be hard to do on a drill press. If you try to hold them with your hand, they want to spin when the bit breaks through the back side. So to prevent this, I made an auxiliary table to hold small pieces securely, as you can see in the photo....
|
| |
How to build a Drill Press Indexing Blocks
A recent project called for drilling a row of very acurrately spaced holes. To do this easily on the drill press, I came up with a simple indexing system....
|
| |
How to build a Drill Press Table
Turn your drill press table into a woodworking table in a few hours....
|
| |
|
< Previous
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
Next >
|
