How to build a Lathe Pole (Bodgers Muddle)
For many of us, the use of a pole is impractical in the modern postage stamp gardens and mini garages beloved of today...
|
| |
How to build a Lathe Polishing Cloth Storage + Useful Chuck Modifications
The one problem I had was where do you put the Duster when it is not in use? if left lying around it is likely to pick up shavings or worse, which often has dire consequences when next used. My solution came to me one Christmas as I delved deep into the Jar of Quality Street to get my favorite y...
|
| |
How to build a Lathe Project - The Three Bells
Here is a PDF of the project, giving you templates for the bells as well as dimensions for the ring. The outside diameter of the main ring is 5.5 inches, so measure it after you print to make sure the drawing is the right scale....
|
| |
How to build a Lathe Supports for Flexible Drive and Drill on The Lathe + Hand Chuck for Drilling
I have devised a number of means of support, all based around the Wolfcraft Universal Drill Clamp (Die Cast Aluminum model) with the 43mm Euro Collar, to cater for the numerous positions around the Lathe that are required....
|
| |
How to build a Lathe Texturing Punches + Center Height Finder
Simply take a piece of Steel and Grind or File the end to a Shape or Style of your choice, Polish it to a reasonable finish and test the result on some off cuts of suitable Timber, I use scraps of Maple as this is a Fine Grained, Dense Hardwood and typical of the types of Wood I would be Texturing....
|
| |
How to build a Lathe Tool - Making a Basic Hook
The hook tool is essentially a right-angle gouge that enables the woodturner doing inside end-grain hollowing to achieve two goals: work with the grain and use a cutting rather than a scraping action....
|
| |
|
How to build a Lathe Tool Handle for Use With Various Turning Tools + Miniature Tools + Wire for Dec
All of these Tools had one thing in common they were made from 8mm ? Steel [ 5/16?] and therefore could be fitted into a common Handle and therefore reducing the Storage Space I would require for this group of Tools. The Picture below shows the finished Tools, I couldn?t resist making a second after...
|
| |
How to build a Lathe Tool Handles
I love how a custom handle feels and works in MY hands: fit to my grip, my turning style, and a length that gives me proper leverage....
|
| |
How to build a Lathe Tool Rest Extension + Parting Off Tool Rest + Abrasive Holders for Sanding Natu
To overcome my initial requirements I had made two Rests, one was 150mm (6...
|
| |
How to build a Lathe Tool Rests + Tool Rest Holder
Tool Rests to your own designs can offer you a greater flexibility in your Woodturning and are relatively easy to make for very little cost....
|
| |
How to build a Lathe Tool Thickness Gauge
This thickness gauge performs the same function as calipers. I made it in 1982 to measure the wall thickness of the first bowl I ever made. I was totally ignorant about woodturning at the time and I made the bowl with nothing but scrapers made from old files. I still have the bowl....
|
| |
How to build a Lathe Vacuum Chuck System
The use of a Vacuum as a means of holding items to be worked on is not new but it...
|
| |
|
< Previous
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
Next >
|
