How to build a Beam Scribe Marking Tool
This Beam Scribe is a great little addition to you tool kit and it also makes a nice gift for that woodworker in your family....
|
| |
How to build a Belt Sander Fence
When I used my stationary belt sander to sand the edge of a board, it was hard to keep the edge straight and square. So I solved this problem by adding a fence to the side of my sander...
|
| |
How to build a Belt Sanding Block
By Bill McCarthy / Riegelsville, Penn. - I do most of my sanding by hand, so I made this convenient wooden sanding block to fit 3-in. x 21-in. sanding belts....
|
| |
How to build a Bench Grinder Modifications and Aids
I use a Diamond Dresser for Truing the Wheels of my Grinder and this comes in the form of a Metal Bar with an Industrial Diamond inserted in one end. To support the Diamond and make it easier to control I made a simple holder and guide for use with the Flat Grinder Platform....
|
| |
How to build a Bench Top Tool Cart
Bench top power tools can be pretty handy. But my collection of these tools got to be larger than the bench space I had to accomodate them. Finally, I got smart. I decided to make all this tool moving a little easier by putting each one on its own rolling cart....
|
| |
How to build a Bench Vise Helper
Whenever I clamp a wide panel or long board to my workbench on edge for sanding or planing, I need a way to support the other end. So I built this simple bench vise helper, as shown in the photos to the right. It...
|
| |
|
How to build a Benchtop Router Stand
One of the minor hassles to using a hand-held router is that you have to wait for the bit to stop spinning before setting the router down. My solution to the problem was to make a simple router stand that allows me to save this wasted time (see photo at this link)....
|
| |
How to build a Benchtop Thickness Sander
After many trips from my workbench to the thickness sanders one afternoon, I decided that there ought to be a better way to dimension small parts, such as nuts, saddles, and bridge blanks. Using a small motor, a shaft-mounted sanding drum, and the ......
|
| |
How to build a Bevel Angle Checker
Here are two widgets to use for checking bevel angles: 1. A continuously variable bevel angle tester 2. A bevel angle tester with a series of fixed angles....
|
| |
How to build a Bill Taggarts Workbench
My Bench - Cheap and easy (Hey! Like me!) but it works... As I read and learned, and started using handplanes, I realized I needed a BENCH. This archived free woodworking plans and projects information is courtesy of the Bill?s Tool Rest web site....
|
| |
How to build a Binky's Roller Blade Ramp
Another fine father/son project to take up your spare time! This took about a month to complete working evenings....
|
| |
How to build a Bird - Wood Duck Nest Box
How to Build a Wood Duck Nest Box by Dick Vaught -...
|
| |
|
< Previous
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
Next >
|
