Woodwork / Carpentry, Free Do-it-Yourself projects, DIY Plans, FAQs, Woodworking, Boat plans, How Tos
How to build a Tool Box
Surprise your father or grandfather with this unique -- and fun to make -- toolbox. The DIY kids will show you how...
How to build a Tool Box
This toolbox can be made to any length. The toolbox can be stackable (up to two) or one alone with the handle in the center....
How to build a Tool Rests + Tool Height Setting Gauge Lathe Deep Boring System
The third and final part of this Article covers the various Tool Rests I have made to use with the Deep Boring System described in the previous two parts, and I conclude with a Height Gauge used to set the Tool Tip for Deep Boring....
How to build a Tool Sharpener
This project is easy enough for almost anyone to tackle with confidence, and will produce a piece of equipment that will keep your workshop running smoothly for years. ......
How to build a Tool Storage Rack
With this clever storage system, Ron and Jeff actually created over 30 square feet of hanging space from only 8 square feet of wall space....
How to build a Tools Storage
I built this 8-ft.-long shelf system to take advantage of the narrow space in the corner of my garage. When the unit is ild this unit at the home center for about $175....
How to build a Toolsandjigs
This table saw jig trims the ends of segmented half-rings so the half-rings fit together into a perfect ring....
How to build a Toolsandjigs
I turn almost all of my turnings glued to a faceplate. I usually part the turnings off the faceplate but I wanted to share a fixture that my friend Sonnie Sharrar uses to cut the faceplates off his bowls. The fixture in the photos is a bit different than Sonniehis fixture can handle them....
How to build a Toolsandjigs
This table saw jig is made for cutting thin strips of wood. I have found that this strip cutter jig does the job more accurately and safely for thin strips than using a push stick or by moving the rip fence after every cut....
How to build a Traditional Featherboards
Feather boards have been around in one form or another for a long time and for most woodworkers they are invaluable. It the other is a table saw method....
